3 Legged Thing Ellie-PD Short Universal L-Bracket with Peak Design Compatible Base (Grey)
135products
The 3 Legged Thing Ellie PD Short L-Bracket with 70mm base plate is designed to easily switches between landscape and portrait while maintaining the centre of the axis. This will ensure a shot, whether vertical or horizontal, to have the same angle and position.
- Compatible with standard Arca-Swiss clamps
- Clips securely into the Capture
- Provides access to the battery door
- Choice of two screw mount slots for optimal positioning of the camera
- Connect accessories on the vertical aspect with L-shaped cable pins
This L-bracket camera accessory facilitates advanced functionality for precision shots for DSLR and mirrorless cameras.
Advanced functionality
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras and advanced functionality.
Landscape to portrait
L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon.
Peak Design's Capture Clip system
Ellie PD Short is specifically designed to work with Peak Design's Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. It has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon.
Mount slots in the base
Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
General
Adjustable Width: 80 mm - 113 mm
Vertical Aspect Height: 85 mm
Base Width: 38 mm
Side Width: 38 mm
What's in the box
- 3 Legged Thing Ellie PD Short L-Bracket (Grey)
- 1/4"-20 Stagsden Stainless Steel Camera Screw
- 2 x 2.5 mm Hex Retaining Bolts
- Dual-Ended Hex Mini Tool
- Limited 1-Year Warranty
Payment plans available. 0% interest.Learn More
Works on the EOS R
Show Details
Excellently made and designed product. Works on the Canon EOS R. It does limit rotation of the flip-out screen once it's opened fully. The vertical arm can be removed though to counter this issue. Great choice for added stability on travel tripods.
Nice product!
Show Details
Other than the somewhat odd greenish colour, the product works great!
Quality Build
Show Details
Much more solid than I expected - I was worried about the adjustable parts having flex - no need to worry, it is rock solid. Like all 'L' plates I found to date it can limit the movement of a fully articulated screen (my R6). I found I can, however, line the screen up so that it goes into the slot on the "portrait" side to get a full 85-95 deg rotation. Difficult to explain. You can also remove the vertical part very quickly and leave the arca/Peak Design base plate on the camera. Very nice that I don't need an extra base plate for my P kit.
Well-built but slightly flawed design on the X-T3
Show Details
Well-built and very useful, however, two things to note: The colour isn't exactly grey, to my eyes it has a bit of a green tint. Also, on my X-T3, the opening on the side is not large enough to access the side door so you will need to remove the bracket to take off the side door in order to access the ports.
Recommended Accessories
Related Products
Only 2 available in Store
Only 1 available in Store
Recently Viewed Items
Tags:
