Use the Ronin-M from DJI to shoot handheld without the shake. This 3-axis motorised gimbal lets you pan and tilt, correcting very fine movements as you move. It weighs only 2.3 kg, yet supports camera setups of up to 3.6 kg. Built-in Bluetooth allows easy setup. Assistant Software lets you configure for iOS or Windows.

Brand: DJI
Product Code: DJI-GCGA-0062
R 16,299.00
Awaiting Stock
Free delivery
on this item

3-Axis Stabilised Handheld Gimbal System

Developed for the filmmaking professional, the DJI Ronin-M 3-Axis Handheld Gimbal Stabiliser marks a generational leap in camera stabilisation technology. With custom sensors, powerful motors and advanced algorithms, this is one of the best drone camera gimbals to eliminate shake.


Features

  • Easy setup
  • Supports camera setups up to 3.6kg
  • ±0.02° precision control
  • Transmitter for remote pan/tilt  control
  • Tool-less balance adjustment system
  • Assistant Software for iOS & Windows
  • Setup with Bluetooth wireless interface =
  • Silent Mode for quiet operation
  • USB & PowerTap power outputs


Save time on set

Once your camera is configured, the Ronin can be ready to shoot in as little as 5 minutes, saving time and increasing efficiency on set. The built-in ATS (Auto-Tune Stability) technology intelligently tunes Ronin to your camera rig at the touch of a button.


Smoothtrack control

Transform tilt and pan movements on the Ronin into smooth and stabilised camera angle changes.


3 Operation Modes

3 different modes of operation allow the Ronin to be used in different scenarios, all of which can be entered without changing settings on the Ronin Assistant app or a 2nd operator remote. SmoothTrack functionality remains in all three modes.

  1. Upright Mode

Flip the gimbal over to bring the camera closer to eye level for a higher perspective without straining to lift it. Use this mode when sticking the Ronin out of a car’s sunroof or when trying to shoot over a crowd of people.

2. Underslung Mode

The default gimbal operation is the Underslung mode. The camera can be comfortably held low to the ground, at chest level or anywhere in between. This mode is also used when the Ronin is suspended from a camera jib or crane.

3. Briefcase Mode

When a slimmer gimbal profile is needed, i.e. when moving through doorways or narrow paths, Briefcase mode is ideal. It allows the gimbal to be held to the side and close to the legs, much like a briefcase.


Extremely durable, high build quality

Made from precision machined aircraft-grade aluminium, the Ronin offers the durability to withstand rugged use on set and meets the high demand for reliability. No loose cables or zip ties give it a clean, professional appearance.


Mobile Bluetooth assistant software 

The feature-rich iOS and Android DJI Assistant software allow easy setup of all system configurations. The PC and Mac Assistant also provides control of all the Ronin’s functionalities in addition to firmware upgrades for future feature


Simple 5-minute setup 

With a little practice, the Ronin takes less than 5 minutes to set up and balance whenever the camera configuration is changed. This saves time, making the Ronin more efficient in professional environments where every second count. The built-in ATS (Auto-Tune Stability) technology intelligently tunes the Ronin to your camera rig at the touch of a button.


Supports a multitude of cameras & lenses 

The Ronin is not customised for any specific camera. It can be easily adjusted to carry everything from small & light M4/3 cameras to heavier systems like the Red Epic.


Based on Zenmuse technology

The DJI Zenmuse gimbals were the first commercially available systems in the world to utilise brushless motor technology for professional filming and aerial photography. The Zenmuse gimbal line has long been a benchmark that others have been measured against. The Ronin is based off the same technology and also offers multiple control modes, a built-in IMU, and customised direct drive brushless motors.


Second operator controller 

An included 2nd operator transmitter allows a 2nd operator to pan, tilt, and roll independently of the Ronin’s movement. SmoothTrack speeds and operation modes can be assigned with 2 custom toggle switches on the transmitter.


High-performance processing power 

A customised, advanced 32-bit floating point DSP processor offers more efficiency than an ARM processor, for faster processing of signals from the onboard encoders.


High torque, precision controller motors 

Motors have been developed with the high-performance Ronin in mind. Using FOC control, you can count on high precision, low vibration, and increased torque. Digital Absolute Positioning Encoders in each axis provide the highest levels of accuracy. This combination of custom motor modules and features is found in no other system.


Built-in receiver & remote control 

A built-in DJI receiver allows the Ronin to be remotely controlled by a 2nd operator. The gimbal operator can focus on gimbal movement while the 2nd operator pays attention to camera movement. 2nd operator mode is also useful for gimbal control when working with flying platforms for aerial cinematography. A D-Bus port is also included if a non-DJI receiver is required.


Quick-release top handlebar

The top bar features a quick release system allowing easy attachment and detachment for rapid setup and break down. The same attachment can be used for vehicle or multi-rotor mounting.


Quick swap intelligent battery 

The Ronin’s customised intelligent battery is easy to install and simple to charge with the provided charger. Remaining power can be checked directly on the battery. Overcharge and over depletion protection is built-in, as is individual battery cell charge balancing. Expected run time is approximately 6 hours, depending on the camera rig and gimbal usage.


Power distribution box

Two regulated 12V P-taps, one 500mAH full-size USB connector, and also a connection point for the DJI Lightbridge Long Range HD Video Downlink are provided. This offers convenient power connection for various accessories including follow focus systems, HD video downlinks and others, all while keeping the wiring to a minimum.


Dual 15MM rods for follow-focus accessories

Follow focus systems and matte boxes can be easily mounted on the Ronin using industry standard dual 15mm segmented rods. The segmented rods allow for customisation of different lengths, dependent on camera and lens setup.


Protective carrying case

An extremely strong, durable and watertight carrying case with rolling wheels provides easy transportation. Dense custom cut EPP foam protects the Ronin and accessories.


Autoconfiguration

After balancing a camera rig, simply tap the Auto-Tune Stability button to tune the Ronin for use. It will intelligently adjust parameters based on your camera rig’s weight and independently adjust each individual axis until an optimal setting is found. Auto-Tune Stability also fine-tunes other aspects of the control system, making balancing fast and easy.


Smoothtrack tuning

Tune each individual speed to your preferences. SmoothTrack provides movement translation based on the Ronin operator’s movement. As the Ronin operator pans or tilts the gimbal, the camera orientation will pan and tilt in the direction the gimbal is moved and then ramp down in speed. This pan and tilt movement speed can be independently adjusted using the software. Translated movement acceleration can also be fine-tuned as well. If the Ronin operator needs to pan or tilt rapidly between two positions and the standard speed isn’t sufficient, an accelerated speed can be adjusted without affecting slower movements.


Remote operator control

Full configuration of the transmitter can be accomplished through the DJI Assistant. Features such as control speed, remapping of what the control joysticks do, and also end-point adjustments can be configured through Assistant.


Ronin Stats

The Ronin’s vital stats can also be viewed on the Assistant app. Key items such as motor power, pan-tilt-roll axis’s degrees of movement, electronics’ temperature monitoring, as well as remaining battery life.


Firmware Upgradeable

All units shipped will have the latest firmware, but due to our continuous drive to innovate, firmware updates will be made available online for improved performance and future features.


Precise focus control

Use the Ronin with the DJI Focus for wireless control of focus or aperture from anywhere on a set.

If you want to know more about this product, we know that you’ll love these articles:

What's in the box?

  • DJI Ronin-M 3-Axis Handheld Gimbal Stabiliser
  • Ronin-M Transmitter (Controller)
  • 2x Intelligent Battery for Ronin-M (1580mAh)
  • Battery Charger
  • Handle Bar
  • Tuning Stand
  • Cable Pack
  • Micro-USB Cable
  • Camera Mounting Plate
  • 2x Camera Screw A (1/4"-20)
  • 2x Camera Screw B (3/8"-16)
  • 2x Camera Screw C (1/4"-20)
  • 2x Camera Screw D (3/8"-16)
  • Lens Support Screw
  • Lens Support
  • 2x Allen Wrenches
  • Limited 1-Year Warranty

Write a review

Bad Good
(Minimum 25 characters)
(3 - 50 Characters)
Bernard

Talk to one of our friendly and knowledgeable consultants about this product. Call us on +27 12 348 3693 or Click to chat with one of our online consultants

`

Related Products

R 450.00
Awaiting Stock
`
Compare Products
View your product comparison