× - STAY HOME -
Stay informed! Visit the SA Department of Health's website for COVID-19 updates: www.sacoronavirus.co.za

RODELink Filmmaker Kit Wireless Lavalier Microphone System

Enlarge +
RODELink Filmmaker Kit Wireless Lavalier Microphone System
Brand: RODE
Product Code: RODELINK
LOCKDOWN INFO - Online store is open. Any orders placed during lockdown will be sent off after the lockdown has been lifted.
R 6,595.00
Free Shipping available

Recommended Accessories

RØDELink represents the next generation of digital wireless systems. Using a series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres (range estimations based on optimal environment). The RØDELink Filmmaker Kit provides everything you need to start shooting video wirelessly, including a receiver, transmitter and broadcast-grade lavalier microphone. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8" thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The lightweight transmitter (TX-BELT) can be fitted to a belt or clothing and features a locking thread to ensure the microphone connection is as secure as possible. RØDE’s omnidirectional Lavalier microphone is included in the kit to provide the highest possible audio reproduction quality.

The beltpack transmitter features a simple 3-stage gain adjustment and a mute lock function to prevent accidental muting. A locking 3.5mm input audio connector ensures body worn microphones remain secure. The camera mount receiver features a removable shoe mount enabling it to be used on camera or as a belt pack receiver. A mute override function gives complete control to the operator, while mute status, input level, and battery status for both the transmitter and receiver are displayed on the front of the unit. The receiver also utilizes the same locking 3.5mm connector as the transmitter to provide solid security.

Both the beltpack transmitter and camera mount receiver can be powered by any USB power source using a standard micro-USB cable. The system offers eight discrete channels that can easily be set up in seconds with over 8000 different channel combinations available. Channel selection and pairing is achieved with a one-press operation and automatic scanning, which significantly reduces setup times when compared to traditional UHF setups.


Filmmaker Kit

Transmission type:
2.4GHz Fixed Frequency Agile System
System dynamic range:
112dB
Range (distance):
Up To 100m
Frequency range:
35Hz - 22kHz
Maximum output level:
1v Rms (2.8v P-p)
Max input signal level:
1v Rms (2.8v P-p)
Max latency:
4ms

Microphones

Acoustic Principle:
Pressure Gradient
Polar Pattern:
Omnidirectional
Frequency Response:
60Hz - 18kHz
Maximum Sound Pressure Level:
110dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Weight:
1g

Receiver (RX-CAM)

Power source:
2 X AA Battery Or MicroUSB
Antenna:
Internal
Input connection:
3.5mm TRS Locking Jack Socket - Dual Mono
Input impedance:
300Ω
Dimensions:
111mm X 65mm X 52mm
Weight:
190g

Transmitter (TX-BELT)

Power source:
2 X AA Battery Or MicroUSB
Antenna:
Internal
Input connection:
3.5mm TRS Locking Jack Socket
Input impedance:
10kΩ
Dimensions:
111mm X 65mm X 52mm
Weight:
190g

If you want to know more about this product, we know that you’ll love these articles:

Write a review

Bad Good
(Minimum 25 characters)
(3 - 50 Characters)
Bernard

Talk to one of our friendly and knowledgeable consultants about this product. Call us on +27 12 348 3693 or Click to chat with one of our online consultants

Related Products

Compare Products
View your comparison
Compare Products
View your comparison