DJI Phantom 4 Pro+ Drone with Battery (Refurbished) + Premium Care







The DJI Phantom 4 Pro+ Drone camera is equipped with a 1" 20MP CMOS sensor capable of shooting 4K/60fps video and Burst Mode stills at 14 fps. The FlightAutonomy system adds dual rear vision sensors and infrared sensing systems for a total of 5-direction of obstacle sensing and 4-direction of obstacle avoidance.
- Gimbal-Stabilised 4K60 / 20MP Imaging
- Top Speed of 72 km/h in Sport Mode
- Maximum Control Range of 7km*
- Visual Tracking of Moving Subject
- TapFly - Fly With a Tap of the Finger
- Up to 30 Minutes Flying Time
- Remote Controller with 1080p Display
* In South Africa you will only be able to receive up to 4km range.
1" CMOS Sensor
The Phantom 4 Pro+ Quadcopter's sensor size is often more important to image quality than the number of pixels, because a larger sensor has dynamic range, better signal-to-noise ratio, and boost low light performance. The 1" 20MP CMOS sensor in the Phantom 4 Pro+ is almost four times the size of the Phantom 4's 1/2.3" sensor. It uses larger pixels and has a maximum ISO of up to 12,800 as well as increased contrast.
H.264 and H.265 4K Video Recording
Powerful video processing supports H.264 4K videos at 60 fps or H.265 4K at 30 fps, both recorded in a 100 Mbps bitrate. The Phantom 4 Pro+'s advanced sensors and processors ensure everything is captured with more image detail and the image data needed for manipulation in post-production.
Production-Optimised 4K
An enhanced video processing system allows video to be captured in cinema- and production- optimised DCI 4K (4096 x 2160) at 60 fps and a bitrate of 100 Mbps. The Phantom 4 Pro+ also supports the H.265 video codec at 30 fps in 4K resolution. For a given bitrate, H.265 doubles the amount of image processing as H.264, resulting in significantly enhanced image quality from a more efficient compression. Record in the high dynamic range D-log mode to make the most of this image data for colour grading.
High-Resolution Lens
The Phantom 4 Pro+ camera has an aerial-optimised f/2.8 wide-angle lens with a 24 mm equivalent focal length. It features eight elements - two aspherical - arranged in seven groups that fit into a smaller, more compact frame. Its images are consistently detailed with low distortion and low dispersion, ensuring that photos and videos are sharp and vivid.
Mechanical Shutter
Capturing objects moving at high speed has always been a challenge for flying cameras using an electronic shutter. This is why the Phantom 4 Pro+ is the first DJI Phantom to use a mechanical shutter and a large-aperture prime lens. A maximum mechanical shutter speed of 1/2000-second eliminates motion blur and "jello effect" caused by shooting a fast moving object with a rolling electronic shutter. The electronic shutter has also been improved with a max shutter speed of 1/8000-second, and a there is Burst Mode shoot capable of shooting 14 fps at 20 megapixels to catch the perfect moment.
Remote Controller with Lightbridge HD Video Link
The Phantom 4 Remote Controller with 1080p Display controller integrates an upgraded Lightbridge HD video transmission system that adds 5.8 GHz transmission support. The ability to choose between 2.4 GHz and 5.8 GHz allows pilots to cut through interference and eliminates image lag caused when flying in an area with extensive 2.4 GHz frequency use. Normally, Wi-Fi video transmission systems use a 2.4 GHz frequency to work with a controller using a 5.8 GHz frequency, as this prevents interference that can occur when both use the same frequency.
Lightbridge HD Video Link
The Lightbridge HD video transmission system used in the Phantom 4 Pro+ uses TDM (Time Division Multiplexing) to transmit signals, allowing it to send controller signals and receive video transmission signals at the same frequency. As the 2.4 GHz frequency band is often affected by Wi-Fi, 4G cell towers, and other types of interference in urban areas, a 5.8 GHz band will increase transmission reliability. When switched on, the Phantom 4 The Phantom 4 Pro+ features a high-luminance display integrated into the remote controller. evaluates local signal levels, automatically choosing the transmission frequency with the lowest level of interference. This enables a maximum video transmission range of 4.3 miles.
Integrated 1080p Display
A 5.5" 1080p screen integrated w offers 1000 cd/m² of brightness, more than twice as bright as conventional smart devices. It makes bright, vivid colours easily visible in direct sunlight. With this screen, a mobile device is not required, simplifying pre-flight preparations. As the DJI GO app is built into the screen, hardware and software can be fully optimized, further reducing video lag. Integration of an HDMI port, microSD card slot, microphone, embedded loudspeaker, and Wi-Fi connection allow images to be edited inside DJI GO to be shared almost instantly. Lastly, a five-hour battery life makes the Phantom 4 Pro+ a complete aerial imaging solution.
Intelligent Flight Modes
Draw
With Draw, simply draw a route on screen and the Phantom 4 Pro+ will move in that direction while keeping its altitude locked. This allows the pilot to focus on camera control and enables more complex shots. There are two Draw modes that can be used in different scenarios:
- Standard: The aircraft follows the route at a constant speed with the camera facing in the direction of flight.
- Free: The aircraft only moves along the route when instructed. In this mode, the camera can face in any direction during a flight.
ActiveTrack
Following fast-moving objects can be very challenging, but advanced, image-recognition algorithms used by the Phantom 4 Pro+ allow it to recognise and track an object while keeping it in frame. This algorithm also recognises a range of subjects, from people to vehicles to animals, and will adjust its flight dynamics to match, ensuring smoother shots. Pilots can now choose between:
- Trace: Follow behind or in front of a subject, avoiding obstacles automatically.
- Profile: Fly alongside a subject at a variety of angles to get profile shots of the subject.
- Spotlight: Keep the camera trained on a subject while the aircraft flies almost anywhere.
TapFly
Fly in any direction visible on-screen with a simple tap. Tap anywhere on-screen to smoothly adjust the direction of flight while automatically avoiding obstacles and tap the screen again or use control sticks to change direction. An AR route function shows the aircraft's real-time flight direction for reference as its route is adjusted. As it can be difficult to control altitude, course, speed and camera pitch simultaneously using joysticks, TapFly Free allows a pilot to set the direction of flight, allowing them to turn the Phantom 4 Pro+ or tilt the gimbal as required without changing the direction of flight. In total, there are now three TapFly modes:
- TapFly Forward: Tap to fly in the selected direction
- TapFly Backward: Tap to fly in the opposite direction of the tap, i.e. tap in the bottom right corner of the screen to fly backward towards the top left.
- TapFly Free: Lock the forward direction of the Phantom without locking the camera direction allowing it to turn as it flies.
Note: Obstacle Avoidance is not available with TapFly Free.
Return to Home
In its Return to Home mode, the Phantom 4 Pro+ can automatically choose the best route to return home depending on environmental conditions. It records its route as it flies, allowing it to return along the same route avoiding obstacles if the control signal is disconnected.
Based on its altitude at the time of disconnection, the Phantom 4 Pro is also able to adjust its flight path to avoid obstacles it has seen during its flight. At takeoff, the Phantom 4 Pro+ will record the scene below and compare its recording with what it sees as it returns, for more precise landing. It can also detect the ground to see whether there is suitable spot for landing. If any obstacles are found, or there is water on the ground, it will alert the pilot and hover at an appropriate height, helping the aircraft to land more safely.
Gesture Mode
With Gesture Mode, selfies can be captured using a few gestures without the remote controller. Computer vision technology allows the Phantom 4 Pro+ to take instructions through gestures. The subject simply lifts their arms when facing the camera and the aircraft will recognise this movement by locking on and placing the subject in the centre of the frame. When ready for a photo, the subject holds their arms out to signal the aircraft. A three-second countdown will begin, making time to strike a pose, allowing moments to be captured without the remote control.
Flight Control System
Flight Modes
Different productions require different flight characteristics, and the Phantom 4 Pro offers three modes for flight: P, A and S. Switching between them allows pilots to get the control they need, whether they seek smoothness, simplicity, intelligent navigation, or speed. In Position Mode (P), TapFly, ActiveTrack, obstacle sensing and positioning features are available. Sport Mode (S) adds extra agility and higher speed, reaching 72km/h. Attitude Mode (A) switches off satellite stabilisation and holds the Phantom 4 Pro+'s altitude. It is ideal for experienced pilots looking to capture smoother footage. Tripod Mode, which limits speed to 4 mph provides precision control for fine framing and indoor flying. Both the infrared sensing system and vision sensors are enabled in these modes for a safer flight experience.
Sensor Redundancy
The Phantom 4 Pro+ features dual compass modules and dual IMU units, making it more reliable when compared to many hexacopters and octocopters. Compasses and IMUs are important sensors to ensure a stable flight and the Phantom 4 Pro+ constantly compares the data it receives through both pairs. This data is run through various algorithms to check accuracy, and any inaccurate data is simply discarded without affecting flight, keeping flight steady and reliable.
Intelligent Battery System
Professional aerial imaging benefits from longer flight times. The Phantom 4 Pro+ features a maximum flight time of 30 minutes, providing more time in the air to capture the perfect shot. The DJI GO app shows battery lifetime and calculates remaining flight times according to the distance travelled and more. It will give alerts when it reaches a minimum safe amount required for a safe journey back to the takeoff point. An advanced battery management system is also in place to prevent overcharging and over draining. When placed in long-term storage, batteries will discharge power to maintain good health.
What is a DJI Refurbished product?
Tested By Experts. Be Safe & Save.
Every DJI Refurbished product is thoroughly tested by DJI Experts and includes DJI standard warranty. Why Refurbished Products?
- Substantial savings for a fully functional product
- The same high quality as new DJI products
- Standard DJI Manufacturer Warranty guaranteed
- DJI Care available for enhanced coverage
What does refurbishment entail?
- Damage Assessment: In-depth inspections to identify the causes of any previous product failures.
- Replacement: Replacement of damaged or defective parts including aircraft shells and sensor modules. New components are marked with new serial numbers for easy identification.
- Functional Testing: Tests of non-flight features including gimbal, remote controller, battery, and many others.
- Flight Testing: Tests of all flight systems including propulsion and video transmission.
- Data Processing: Firmware upgrades to the latest version, flight path information erased and aircraft deactivated.
- Final Checks: All visible parts checked and cleaned or replaced as necessary.
- Packing & Shipping: Packed with new accessories, including user manual, propellers and vibration damper.
Keep Flying with Premium Care
Premium Care is a service plan exclusive to selected aircraft purchased through Outdoorphoto, that provides you with peace of mind, covering damage to your DJI aircraft, gimbal or camera sustained during normal use.
By purchasing from Outdoorphoto, you will receive a coverage amount equal to the market price of your aircraft for repair services within the validity period, providing you with worry-free flight.
During the validity period, if accidental damage occurs during normal use, repair fees and related costs will be covered by DJI.
- 12-month damage care
- 50% discount loan unit
Premium Care includes a 5% charge on all repairs, so if quote to repair is R10k, the client pays only 5%.
Other benefits include an expedited repair service, and 50% discount on DJI aircraft rental while your Aircraft is under repair.
Premium Care will be terminated without notice in the following situations:
- The service has expired
- Your DJI product was repaired by non-official DJI repair centre
- If a customer has found to have broken a product on purpose, the service will be terminated automatically.
The Premium Care service is valid for 12 months from activation of aircraft, and will automatically terminate once repair cost equals the market value of aircraft.
What's not covered?
- Lost or partially lost aircraft, gimble or camera
- Stolen, forgotten or abandoned product
- Damage caused by flight under unsuitable conditions
- Remote controller
- Abrasions or shell damage that does not affect the performance of the product
- Direct or indirect losses caused by force majeure
- Repair requests outside of the period of validity
- Damage resulting from modifications that are not in accordance with manual recommendations, or the use of incompatible batteries and charger
- Damage resulting from 3rd party accessories
- Flying aircraft in Sport Mode will automatically void your Premium Care
Aircraft
Horizontal: ±0.3 m (With Vision Positioning); ±1.5 m (With GPS Positioning)
DJI Camera
Effective pixels: 20 Megapixel
f/2.8 - f/11.
auto focus at 1 m - ∞
Photo: 100 - 3200 (Auto); 100- 12800 (Manual)
Electronic Shutter: 1/2000 - 1/8000 s
4:3 Aspect Ratio: 4864 × 3648
16:9 Aspect Ratio: 5472 × 3078
Burst Shooting: 3/5/7/10/14 frames
Auto Exposure Bracketing (AEB): 3/5 bracketed
frames at 0.7EV Bias
Interval: 2/3/5/7/10/15/30/60 s
・C4K:4096×2160 24/25/30p @100Mbps
・4K:3840×2160 24/25/30p @100Mbps
・2.7K:2720×1530 24/25/30p @65Mbps
2720×1530 48/50/60p @80Mbps
・FHD:1920×1080 24/25/30p @50Mbps
1920×1080 48/50/60p @65Mbps
1920×1080 120p @100Mbps
・HD: 1280×720 24/25/30p @25Mbps
1280×720 48/50/60p @35Mbps
1280×720 120p @60Mbps
H.264
・C4K:4096×2160 24/25/30/48/50/60p @100Mbps
・4K:3840×2160 24/25/30/48/50/60p @100Mbps
・2.7K:2720×1530 24/25/30p @80Mbps
2720×1530 48/50/60p @100Mbps
・FHD:1920×1080 24/25/30p @60Mbps
1920×1080 48/50/60 @80Mbps
1920×1080 120p @100Mbps
・HD: 1280×720 24/25/30p @30Mbps
1280×720 48/50/60p @45Mbps
1280×720 120p @80Mbps
Write speed ≥15MB/s, class 10 or UHS-1 rating required
Video: MP4/MOV (AVC/H.264;HEVC/H.265)
Batteries
Remote Controller
FCC: 4.3mi (7km);
CE: 2.2mi (3.5km);
SRRC: 2.5mi (4 km)
5.725 GHz - 5.825 GHz(Unobstruoted, free of interference)
FCC: 4.3mi (7km);
CE: 1.2mi (2 km);
SRRC: 2.5mi (4 km)
GL300F: USB
1000 cd/m2, Android system, 4G RAM+16G ROM)
GL300F:Tablets and smart phones
FCC: 26 dBm; CE: 17 dBm; SRRC: 20 dBm
5.725 GHz - 5.825 GHz
FCC: 28 dBm; CE: 14 dBm; SRRC: 20 dBm
Intelligent Flight Battery
Recently Viewed Items
Tags: